Servo Drill Microprocessor Controlled Quill Feed - M-709-0-0708

Description

THIS AUCTION IS FOR A
Servo Microprocessor Controlled Quill Feed - M-709-0-0708
This Servo Drill is in near new condition - New it sells for ,000
Specifically designed for peck drilling - small deep holes
Not another one like it
Focus Sheet For M-0708
http://www.servoproductsco.com/specs/80855_focus-on_708_drill_press.pdf
Email me about Choice of Chuck
USA Located and Shipped
Shipping is .00 to lower 48
Shipped same day if ordered by 2 PM MST
Shipping in (3) Boxes
Ask before bidding about international shipping
This auction includes the following items and features:
This auction includes the following items:
Servo Controlled Quill Feed - M-709-0708
Programable Servo Micro Drill
Controller
Servo Model 709 Foot Switch
19" oversize Column with W/ offset or Elbow allowing adjustable centering of drill spindle
Levin 1/8" Collet
(2) T-Nuts
Servo Operation and Maintenance Manual
Choice of (1) of (3) Different Chucks:
Rohm RO-O 1/64-5/32" T.O. Key S7, 8mm Lathe Chuck w/ Key, Mounted on a Starrett 8 mm Collet
Albrecht 0-1.5mm Keyless
Albrecht 0-1/8", 0-3mm Keyless
Choice of one of three chucks:
Rohm RO-O 1/64-5/32" T.O. Key S7, 8mm Lathe Chuck w/ Key, Mounted on a Starrett 8 mm Collet
Albrecht 0-1.5mm Keyless
Albrecht 0-1/8", 0-3mm Keyless
This auction includes the following features:
Model 708
Program and run all operations from the controller keyboard
Programmable dwell, chip clearing height and variable peck depth
Peck Steps: 0.001?-1.4? / 0.02mm-35.6mm
Hole depth accuracy: +0.001? / 0.02mm
Quill Travel: 1.4? / 35.6mm
Maximum quill force: 35 Lbs. / 16 Kg
Feed rates: 0.01-30 IPM / 0.250750mm/min
Optional foot switch (Model 709)
(2) Column Mounting Holes in base 1 1/2" apart
Unique Offset or Elbow and Deep Stainless Steel T-slot Base
3/16 HP Motor
Inch Model
If you have any questions on product, shipping, multiple purchases or comments please email me