-40%
MikroTik CCR1036-12G-4S Cloud Core Router 12xGbit LAN, 4xSFP, Rack-Mount
$ 474.67
- Description
- Size Guide
Description
CCR1036-12G-4SCCR1036-12G-4S is an carrier grade router with a cutting edge 36 core Tilera CPU! Unprecedented power and unbeatable performance - this is our new flagship device. Over 20 times faster than our previous top model, the Cloud Core supports throughput of up to 24 million packets per second, or up to 16 gigabits - full wire speed.
The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, serial console and a USB port. A color touchscreen displays device status, traffic graphs, or provide access to simple configuration options.
It has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS, so will accept and utilize 16GB or more. It comes with power supply and 1U rackmount case.
The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.
Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)
Product specifications
Details
Product code
CCR1036-12G-4S
CPU nominal frequency
1.2 GHz
SFP DDMI
Yes
CPU core count
36
Size of RAM
4 GB
Architecture
TILE
10/100/1000 Ethernet ports
12
Number of USB ports
1
Power Jack
1
Supported input voltage
13 V - 30 V
Voltage Monitor
Yes
CPU temperature monitor
Yes
PCB temperature monitor
Yes
Dimensions
355x145x44mm
Operating System
RouterOS v6 (64bit)
Tested ambient temperature
-20C .. +60C
License level
6
Current Monitor
Yes
CPU
TLR4-03680CG-12CE-A3b
Max Power consumption
69W
SFP ports
4
USB slot type
microUSB type AB
Serial port
RS232
Storage type
NAND
Storage size
1 GB
Ethernet test results
CCR1036-12G-4S
Tile 36 core max possible throughput test
Mode
Configuration
1518 byte
512 byte
64 byte
kpps
Mbps
kpps
Mbps
kpps
Mbps
Bridging
none (fast path)
1300.4
15792.1
3759.4
15398.5
28808.0
14749.7
Bridging
25 bridge filter rules
1300.4
15792.1
3760.4
15402.6
5163.5
2643.7
Routing
none (fast path)
1300.4
15792.1
3762.4
15410.8
28808.0
14749.7
Routing
25 simple queues
1300.4
15792.1
3762.4
15410.8
7643.1
3913.3
Routing
25 ip filter rules
1300.4
15792.1
3033.9
12426.9
3049.7
1561.4
All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results