Micro Hydro PMA Generator, Pelton Wheel 1k-2k Watts, 24-48 VDC Motenergy ME1603

Description

Pelton Wheel and PMA Generator set.  These two products were designed to work with 1200 to 2500 watts output, for charging batteries in Home Power systems.  Note that this is a 3-Phase, AC generator and you need to purchase your own 3-phase full wave rectifier to convert the AC output to DC for charging batteries, from 24 to 48 VDC after your rectifier bridge.  You can find 3-phase rectifiers and Charge Controllers on eBay from companies like Coleman Air.
Pelton Wheel Part Number ME0903.
PM Generator ME1603.
The Pelton wheel has die cast aluminum cups for many years of product life..  There are 12 cups.  The generator uses Ceramic magnets and has over 85% efficiency, much hither than a standard car alternator which is usually 60%.  The Pelton Wheel mounts directly onto the PM Generator shaft with 4 x M5 mounting bolts (bolts not included but can be purchased from a local hardware store).
Designed for use on your own Pico Hydro Projects. You will also need to build a water box and add a nozzle, plus you will need a 3-phase full wave rectifier and a charge controller.
Easily provides 1000 watts of power with one nozzle, 2000 watts with two nozzles.  With one 3/4 inch nozzle and 28 PSI (65 feet), 80 gallons per minute, it provides 500 watts output.  You can add up to 4 nozzles.
For reference, here is a quick calculation for an approximation of the available power at your site:
Flow in GPM x Height in Feet x 0.18 x 0.5 = Output Power
This is a very durable wheel and there are no brushes to wear-out on the AC generator.
Shipping weight of 19 pounds.  Comes in corrugated box measuring 12 x 12 x 12 inches.
International buyers should note that you may have to pay some duty or VAT due when the goods arrive in your country.  Ebay and Paypal does not charge this duty and VAT when you check-out.
The items are also sold separately on eBay