Cisco CCNA CCNP R&S VOICE SECURITY LAB CME 8.6 IOS 15.1 POE RACK INCLUDED

Description

Please contact us, if you have any question.
1(972)-423-6829
Why do I need to buy Hyper Networks Cisco LAB KITs?
Firstly; Cisco made CCNA 200-125 V3 exam harder than the CCNA 200-120 V2 exam.
Cisco wants to make sure you
really
know your stuff on this exam. CCNA 200-125 V3 exam includes
multiple choice, multiple answer, drag-n-drop, interactive router simulations, testlet and simlet question
types. Especially, you need to study with actual devices for understanding interactive router simulations, testlet and simlet question
types. You need to have
a high-level understanding of what is happening for passing the exam. You need to practice on more complex setups and you need to understand very well what is happening. That is why we set up these lab kits and provide you to work with actual devices.
Why do I need a physical router?
You need a physical router because:
*The simulators don't have the ability to give you the
hands on
.
*You need to see what happens when you disconnect a cable.
*You may put a cable in the wrong location or just plain configure the interface incorrectly.
*Dependent on what you do by mistake, you may see either the interface or protocol go down.
*You can do troubleshoot based upon that it should give you a clue of where to start troubleshooting.
*You can see what layer is the interface at and what layer is the protocol at.
* You can find quite quickly which mistakes you make on Router 1 which can affects other Routers.
à
No simulator can simulate that, so real routers and switches are invaluable.
All Products are fully tested.
Please contact us, if you have any question.
LIMITED TIME ONLY
1x CISCO 2821 2xFE Router 256/64 IOS 15.1
WILL BE UPGRADED TO
1x CISCO 2911 3xGE Router 512/256 IOS 15.7 CME 12
&
2x CISCO 2821 2xFE Router 256/64 IOS 15.1
WILL BE UPGRADED TO
2x CISCO 1921 2xGE Router 512/256 IOS 15.8
60-DAYS REPLACEMENT WARRANTY
Included Items in the lab:
Routers:
3x CISCO2821 256DRAM/64MB Flash
15.1M   IOS
2x Gigabit Ethernet Interfaces
Switches:
1x WS-C3550-24PWR-SMI POE LAYER 3
with latest Enhanced EMI Image, Multi-Layer IP 24 Port
IOS c3550-ipservicesk9-mz.122-50.SE1
2x WS-C2950-24 IOS
c2950-i6k2l2q4-tar.121-22.EA14
24 Fast Ethernet  Interfaces
IP Phones:
2x CP-7940 VOIP Phone  (Power adapter not needed, powers on directly from POE switch using Ethernet Cable)
Cables:
1x Console Cable
5x Ethernet Cable
6x Power Cable
Desktop Rack:
1x 12U Desktop Rack with rack mounts (Rack mounts for Router & Switches)
We also included a BONUS DVD
-SDM Software
- TFTP Software
- Lab examples, questions and answers, manuals, configuration examples, etc.
How Many Routers Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three routers.
One router
will give you the ability to run the commands on it and will allow you to memorize the correct syntax and context in which to run the commands.
Two routers
will allow you to be able to see route table information propagate, data propagation and path election. In addition, you will see basic device elections.
Three or more routers
and you will get all the above, more complex topologies and full device elections.
We strongly suggest you buy three router kits.
How Many Switches Do I Need for my Cisco CCNA Lab?
Let`s explain to you what you can do with one, two or three switches.
One switch
will give you the ability to run the commands on the switch and allow you to memorize the correct syntax and context in which to run the commands. It will also allow you to do some of the VLAN labs.
Two switches
will allow you to see VTP Domain & VLAN information propagate. In addition, you will see basic device elections.
Three or more switches
you will get all the above and full device elections.
We suggest to you buy our three switch lab kits because of having the best learning experience.
Please contact us, if you have any question.
1(972)-423-6829