-40%

CISCO CCNA CCNP CCIE Collaboration Voice LAB KIT

$ 79.19

Availability: 100 in stock

Description

CISCO CCNA CCNP CCIE Collaboration LAB KIT
·
The best Cisco collaboration lab kit that covers Cisco Call Manager Express CUCME all topics.
·
Practice on both SIP and SCCP phone.
·
Pre-configured Call manager Express setup both CLI and GUI.
·
Installed a PVDM for conference and transcoder
·
Plug and run.
·
Included CME lab workbook with lab examples.
Lab KIT Includes
·
1 x Cisco 2821 Router version (C2800NM-ADVENTERPRISEK9-M), Version 15.1
·
512 MB RAM 256 MB flash card
·
1 x PVDM2 – 32
·
1 x Cisco 3750-24 Version 2 Switch POE Version 15.0(2) SE7
·
1 x Cisco 7961 or 7941 SCCP phone
·
1 x Cisco 7960 or 7941 SIP phone
·
Console Cable
·
2 x Power Cords
·
3 x Straight Cables
·
1 x Serial to USB converter
Switch#sh ver
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 15.0(2)SE7, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 23-Oct-14 14:36 by prod_rel_team
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.2(50r)SE, RELEASE SOFTWARE (fc1)
Switch uptime is 2 hours, 21 minutes
System returned to ROM by power-on
System image file is "flash:c3750-ipservicesk9-mz.150-2.SE7.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
cisco WS-C3750V2-48PS (PowerPC405) processor (revision H0) with 131072K bytes of memory.
Processor board ID FDO1436X01Y
Last reset from power-on
1 Virtual Ethernet interface
FastEthernet interfaces
Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address       : B4:A4:E3:5B:A4:80
Motherboard assembly number     : 73-11705-12
Power supply part number        : 341-0266-03
Motherboard serial number       : FDO14360JCG
Power supply serial number      : LIT14330YK8
Model revision number           : H0
Motherboard revision number     : B0
Model number                    : WS-C3750V2-24PS-S
System serial number            : FDO1436X01Y
Top Assembly Part Number        : 800-31041-05
Top Assembly Revision Number    : C0
Version ID                      : V05
CLEI Code Number                : COMP600ARA
Hardware Board Revision Number  : 0x03
Switch Ports Model              SW Version            SW Image
------ ----- -----              ----------            ----------
*    1 26    WS-C3750V2-24PS    15.0(2)SE7            C3750-IPSERVICESK9-M
Configuration register is 0xF
Switch#sh env all
FAN is OK
SYSTEM TEMPERATURE is OK
System Temperature Value: 35 Degree Celsius
System Temperature State: GREEN
Yellow Threshold : 66 Degree Celsius
Red Threshold    : 76 Degree Celsius
SW  PID                 Serial#     Status           Sys Pwr  PoE Pwr  Watts
---  ------------------  ----------  ---------------  -------  -------  -----
1  Built-in                                         Good
SW  Status          RPS Name          RPS Serial#  RPS Port#
--  -------------   ----------------  -----------  ---------
Switch#sh post
Stored system POST messages:
Switch 1
---------
POST: CPU MIC register Tests : Begin
POST: CPU MIC register Tests : End, Status Passed
POST: PortASIC Memory Tests : Begin
POST: PortASIC Memory Tests : End, Status Passed
POST: CPU MIC interface Loopback Tests : Begin
POST: CPU MIC interface Loopback Tests : End, Status Passed
POST: PortASIC RingLoopback Tests : Begin
POST: PortASIC RingLoopback Tests : End, Status Passed
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: PortASIC CAM Subsystem Tests : Begin
POST: PortASIC CAM Subsystem Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
Switch#sh power inline
Module   Available     Used     Remaining
(Watts)     (Watts)    (Watts)
------   ---------   --------   ---------
1           370.0       12.6       357.4
Interface Admin  Oper       Power   Device              Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa1/0/1   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/2   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/3   auto   on         6.3     IP Phone 7961       2     15.4
Fa1/0/4   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/5   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/6   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/7   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/8   auto   on         6.3     IP Phone 7960       n/a   15.4
Fa1/0/9   auto   off        0.0     n/a                 n/a   15.4
Fa1/0/10  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/11  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/12  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/13  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/14  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/15  auto   off        0.0     n/a                 n/a   15.4
Interface Admin  Oper       Power   Device              Class Max
(Watts)
--------- ------ ---------- ------- ------------------- ----- ----
Fa1/0/16  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/17  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/18  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/19  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/20  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/21  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/22  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/23  auto   off        0.0     n/a                 n/a   15.4
Fa1/0/24  auto   off        0.0     n/a                 n/a   15.4
ROUTER….
CME#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 15.1(3)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 10-Aug-11 05:17 by prod_rel_team
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
CME uptime is 2 hours, 36 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.151-3.T2.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
Cisco 2851 (revision 53.51) with 509952K/14336K bytes of memory.
Processor board ID FTX1113A34Q
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        CISCO2821             FTX1113A34Q
Configuration register is 0x2102
CME#sh inv
NAME: "2851 chassis", DESCR: "2851 chassis"
PID: CISCO2851         , VID: V03 , SN: FTX1113A34Q
NAME: "PVDMII DSP SIMM with three DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with three DSPs"
PID: PVDM2-32          , VID: V01 , SN: FOC12221GAH
Please contact me if you need more information.